BTBNH - BR-315 A EPOXY ADHESIVE
- MSDS: BTBNH
- Manufacturer: BURKE INDUSTRIES
- Product Name: BR-315 A EPOXY ADHESIVE
- National Stock Number: 8040-00F033031
Product Identification
Product ID:BR-315 A EPOXY ADHESIVE
MSDS Date:10/22/1991
FSC:8040
NIIN:00F033031
MSDS Number: BTBNH
Responsible Party
SAN JOSE, CA 95112
US
Emergency Phone: 408-297-3500
Info Phone: 408-297-3500
Cage: 96780
Contractor
Telephone: 408-297-3500
Cage: 96780
Ingredients
BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN, EPON 820,
CAS: 25068-38-6
RTECS: KD4380000
Fraction By Weight: 35-50%
ISOPROPANOL (ISOPROPYL ALCOHOL), 2-PROPANOL, DIMETHYL
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 2-10%
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM
METHANOL (METHYL ALCOHOL), COLUMBIAN SPIRITS
CAS: 67-56-1
RTECS: PC1400000
OSHA PEL 260 MG/CUM
ACGIH TLV: 262 MG/CUM (SKIN)
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
138-140 G/L
RTECS: 9999999VO
Fraction By Weight: 4-15%
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NOSE, THROAT IRRITATION.
IF INHALE MAY BE HARMFUL/FATAL. SKIN: IRRITATION/DERMATITS. SKIN:
IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: REPORTS HAVE ASSOCIATED REPEATED &
PROLONGED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS WITH PERMANENT
BRAIN & NERVOUS SYSTEM DAMAGE.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR & APPLY ARTIFICIAL
RESPIRATION IF NEEDED. EYES: FLUSH W/PLENTY OF WATER FOR 15 MINS.
INGESTION: IF VICTIM IS CONSCIOUS, INDUCE VOMITING & GIVE
WATER/MILK TO DRINK. DON' T GIVE ANYTHING BY MOUTH TO AN
UNCONSCIOUS PERSON. SKIN: WASH THOROUGHLY W/SOAP & WATER/HAND
CLEANER. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:67F
Lower Limits:2.0
Extinguishing Media:WATER FOG, FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:USE SCBA
Unusual Fire/Explosion Hazard:VAPORS ARE FLAMMABLE IF ALLOWED TO
COLLECT & CONCENTRATE. CLOSED CONTAINERS MAY DEVELOP EXCESSIVE
PRESSURE & ERUPT WHEN EXPOSED TO EXTREME HEAT.
Handling
Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. ONLY
USE AS DIRECTED ON LABEL. CLOSE CONTAINER AFTER EACH USE. DON'T
REUSE CONTAINER.
Other Precautions:AVOID SKIN/EYE CONTACT.
Exposure Controls
Respiratory Protection:NIOSH APPROVED RESPIRATORY EQUIPMENT
Ventilation:PROPER VENTILATION NORMALLY SUFFICIENT.
Protective Gloves:RECOMMENDED
Eye Protection:GLASSES
Work Hygienic Practices:WASH SKIN THOROUGHLY W/SOAP & WATER/HAND
CLEANER.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:150-250F
Vapor Pres:32
Vapor Density:>1
Spec Gravity:1.48
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:HEAVY EPOXY RESIN PASTE W/ALCOHOL ODOR
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME, ALL OTHER
SOURCES OF IGNITION.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.